德国开元华人社区 开元周游
标题: BASF faurecia RAFI职位招聘｜4.15中国人才日线上展会报名 [打印本页]
作者: campuschina 时间: 21.3.2021 13:39
标题: BASF faurecia RAFI职位招聘｜4.15中国人才日线上展会报名
BASF 公司职位发布：
Deputy Technology Manager, Polyethylene/ Ethylene Oxides and Glycols
(CN-Guangdong-Zhanjiang)
Entry Level Position
Objectives:
- As the future technology expert for production processes of Polyethylene or Ethylene Oxides and Glycols
- process in the Petrochemicals Division, work together with Global and China mega project team to design, engineer, construct, start-up and operate a petrochemical production cluster for BASF.
- Design phase of the project will be executed in Shanghai. The project and future plant management team will move into BASF New Verbund Site in Guangdong Zhanjiang.
Main Tasks:
- Coordinate with the project team to achieve the requirements regarding cost, schedule, quality and safety.
- Take the responsibility as a commissioning manager to prepare the production cluster for a safe and successful start-up. Define commissioning, operations and maintenance concepts.
- Support the Petrochemicals Division management in preparation and execution of process safety reviews.
- Act as a Deputy Technology Manager until ready for start-up of the plant by ensuring the implementation of all the project technology requirements.
- After start-up, act as a Process Manager, key member of the plant management team, direct reports to the Senior Process Manager, be responsible for continuous improvement process in operation.
- Select and implement optimization technologies, analyze daily operation and identify potentials for improvements.
- Take care for important safety relevant documents ensuring the responsible care principles of BASF.
Deputy Technology Manager,Acrylic-acid & Esters/ Oxo C4/ Syngas
(CN-Guangdong-Zhanjiang)
Entry LevelPosition
Objectives:
- As the future technology expert for production processes of acrylic-acid and esters or oxo C4 or syngas.
- process in the Petrochemicals Division, work together with Global and China mega project team to design, engineer, construct, start-up and operate a petrochemical production cluster for BASF.
- Design phase of the project will be executed in Shanghai. The project and future plant management team will move into BASF New Verbund Site in Guangdong Zhanjiang.
Main Tasks:
- Coordinate with the project team to achieve the requirements regarding cost, schedule, quality and safety.
- Take the responsibility as a commissioning manager to prepare the production cluster for a safe and successful start-up. Define commissioning, operations and maintenance concepts.
- Support the Petrochemicals Division management in preparation and execution of process safety reviews.
- Act as a Deputy Technology Manager until ready for start-up of the plant by ensuring the implementation of all the project technology requirements.
- After start-up, act as a Process Manager, key member of the plant management team, direct reports to the Senior Process Manager, be responsible for continuous improvement process in operation.
- Select and implement optimization technologies, analyze daily operation and identify potentials for improvements.
- Take care for important safety relevant documents ensuring the responsible care principles of BASF.
RAFI公司职位发布：
Mechanical Design Engineer / 机械设计工程师
(Minhang, Shanghai / 上海市闵行区)
Entry Level Position
Responsibilities
- Design products forautomotive, electro medical or automation industry.
- Design mechanical elements, including mechanical drawing, calculation andsimulation.
- Use DFMEA and other failure mitigating design tools.
- Analyze the function of mechanical elements, evaluation the risk ofmechanical design.
- Ensure on-time delivery of mechanical design, documents and partperformance.
- Learn & apply the new techniques in the market.
- Technical product definition and process feasibility, in line withdeadlines, quality and costs targets.
- Communicate with supplier about manufacturing process related topics.
- Working in and with international product development teams with people fromdifferent departments.
- Support in monitoring and technical benchmarking of competitors andsuppliers.
- Support other design engineers and check drawings and documentationsperformed by them.
- Coordinate the development project and communicate within the team.
- Apply Group Standards to concept and design details of a product, tooland/or equipment.
- Supports presentation to customers as required.
- Create documentation to introduce the product design, technology andrealization to customer.
- Works with production engineers to ensure functional process feasibility ofthe proposed design.
- Participate in improvements for process feasibility, quality, design etc.
- Follow engineering design process and product release procedures accordingproject milestone needs.
- In charge of product failure analysis and carry over lessons learned intoimproved designs.
- Provide technical support to manufacturing during pilot run and productionstart-up until transfer to series production.
- Technical support during project acquisition.
- Create and update the BOM, initiate ECR (Engineering Change Request).
- Contribute to design review & product robustness.
- Contribute to the product validations.
- Ensure consistency between GD&T (incl. Tolerance stacks) and processfeasibility.
- Follow other tasks assigned by the Manager.
(Qingpu, Shanghai / 上海市青浦区)
Responsibilities
- Support to calculate / estimate production and one-off cost during inquiry phase
- Support to prepare all necessary documentation during NPI phase
- Support to create DFM guidelines for R&D and other departments
- Support to define manufacturing, testing and packing processes, and coordinate the evaluation and selection of new equipment
- Conduct time and motion studies to assist management in establishing production standards and identify opportunities to boost operation efficiency, quality and profitability by utilizing process improvement methods such as PFMEA, value stream mapping, SPC, CPK, DOE, lean and Sig Sigma.
- Lower the cost of production by eliminating wastes in both manpower and materials.
- Plan, design and structure workflows and work systems, taking into account new methods and technologies.
- Prepare charts, graphs and diagrams to illustrate workflow, routing, floor layouts, material handling and machine utilization.
- Verify equipment settings or machine controls, observe employees in the performance of their assigned responsibilities and record time spent on complete task or sub-tasks to determine time involved and fatigue rate. Create / update the routing data in SAP.
Requirements
- Bachelor degree, majored in industrial, mechanical, electronics and manufacturing engineering.
- Proficient English language, German is a plus.
- Willing to closely work with production functions.
- Familiar with MS office software.
Faurecia公司职位发布：
Innovation Engineer
Entry Level Position
Individual Tasks:
- Supports the IPL &/or leads the compilation and follow-up of project plans, creation of concept matrices and feasibility studies in accordance with corresponding departments: GTS (Global Technology & Standards), Testing, CAX, PPV, Industrial Design, IAD, ISPS, Costing, Purchasing, Marketing, CE, Development Quality & in line with Innovation Global Domain Manager (GDM).
- Supports the IPL &/or leads the compilation and building of Innovation Validation Plans (based on conceptional study results, risk analysis (incl. FMEA’s), internal & external functional analysis etc) according to FIS innovation process in co-operation and accordance with the corresponding GTS/GDM.
- Project reviews: Supports/leads Monthly project reviews with key stakeholders (e.g. GTS (Global Technology & Standards), Testing, CAX, PPV, Industrial Design, IAD, ISPS, Costing, Purchasing, Marketing, CE, Development Quality & in line with Innovation Global Domain Manager (GDM) and Senior Regional Manager (SRM) depending on the project phase.
- Supports/leads the documenting of results in form of reports, presentations, drawings, samples for presentation, Bills of material etc.
- Supports IPL with the preparation and presentation of the project milestone at the relevant Innovation Committees (MIC) in accordance with the Innovation Process & the respective MIC templates (on the iNet).
- Supports IPL &/or prepares the documenting of research results in the form of research reports, presentations, drawings/ sketches, models, prototypes, concept part lists and results from simulation calculations etc.
- Ensure patent protection on innovative solutions in close cooperation with the Intellectual Assets Department (IAD).
- Supports IPL in the co-operation with Concept Engineering and GTS to communicate and assure good transfer of innovation projects into serial development.
- Supports IPL in the co-operation with external development partners aligned with IAD/GTS/GDM/SRM. Guidance of suppliers in pre-development projects.
- Co-operation with FIS Innovation departments in Meru (France), Auburn Hills (USA), Shanghai (China), Valencia (Spain) & Pune (India).
- Acts cost-consciously in all aspects of business (project, travel etc).
- Supervision of master thesis, internships & VIE’s where applicable.
Register to meet Faurecia and otherTop Employers at the DIGITAL CHINESE TALENT DAY on April 15, 2021 – Register here,it is free!
| 欢迎光临 德国开元华人社区 开元周游 (https://forum.kaiyuan.cn/) |
Powered by Discuz! X3.2 |